Ad Details


Core Cutting is a technique used for creating openings for pipe, wire, ventilation, or air conditioning. Avoiding going through reinforcement core cutting must be carefully planned.

In areas of excessive and non-critical stress on concrete and steel cores, it is preferable to plan properly to avoid stressed areas.

Coring cutting Areas should be scanned with the Concrete scanning machine. The scanning machine passes the rebar to detect the Metal and the Scanning person marks the Core cutting Place.

Core cutting Usage:
Creating a hole for installing ducts such as for A.Cs, Door openings, Window openings, pipes, etc.
In old structures or bridges, it is used for samples for strength testing.
Applications of Core Cutting:
There are the following applications of core-cutting such as:

Core cutting is done to make provisional holes for the purposes of electrical wiring, plumbing, firefighting systems, rainwater outlets, heating, air-conditioning, and ventilation installations.
On brick walls, RCC walls, black stones, slab Coring, beams, columns, water tanks, etc. core-cutting can be done.
Through RCC Diamond Core-Cutting, applications like industrial floor cutting, concrete testing, and readymade houses are also made possible.
To make holes of 2 to 24-inch diameters and up to 2 meters of depth, the Concrete coring cutting method can be used.
Concrete Core Seizes:
350 MM length
12 MM Circular Core holes.
14 MM Circular Core holes.
16 MM Circular Coring holes.
18 MM Circular Core holes.
20 MM Circular Coring holes.
25 MM Circular Coring holes.
30 MM Circular Coring holes.
32 MM Circular Core holes.
35 MM Circular Core cutting holes.
37 MM Circular Coring holes.
40 MM Circular Core Drilling holes.
42 MM Circular Drilling holes.
47 MM Circular Concrete holes
450 MM Length
52 MM Circular core Drilling Holes.
62 MM Circular concrete cutting Holes.
72 MM Circular coring Holes.
77 MM Circular core Drilling Holes.
102 MM Circular core Drill Holes.
122 MM Circular concrete cutting Holes.
152 MM Circular Drilling Holes.
200 MM Circular Saw Hole Cutter.
250 MM Circular coring Holes.
Advantages of Concrete Cutting Service
There are the following advantages of this method such as:

To drill holes in concrete, core cutting is a fast, accurate, and clean way.
It eliminates dust and reduces the amount of waste.
It requires much fewer labor hours which in turn leads to significantly lower operating costs and it is much faster and more efficient.
In creating precise holes and cuttings with minimal or non-existent damage to the surroundings it is extremely effective.
This process does not transfer the vibrations to the nearby structures and keeps them safe and during the drilling operations, it structurally sounds.
Disadvantages of Concrete cutting
There are the Following Disadvantages of this method Such As:

Normally, Cores are removed to expose weak points within the elements, and high-strength patch repair materials are used to repair the location of cores
If the coring damages the existing rebar it can damage the structural performance of the element.
Core drilling machinery will have a very strong kickback and you have to be ready and strong for this.
If you need large drill bits, the machinery can be very expensive.
Our Others Services
Slab Cutting
Demolition Building or demolition Work
Marble Polishing
Saw Hole Cutter
Saw / Sawing
Door Cutting or Opening
Ac Duct Cutting Or opening
Windows Cutting or Opening
Wall saw
concrete Work


Leave a Comment

Your email address will not be published. Required fields are marked. *

Success! Thanks for your comment. We appreciate your response.
You might have left one of the fields blank, or be posting too quickly

error: Content is protected !!